Transfer case sump cover

Code: DA9016

  • Series 1, 2, 2A and 3 models (except V8)

Billet transfer case sump oil coolers are designed to replace the flimsy sump covers supplied as standard equipment. These covers are stronger than the originals and have cooling fins to keep the oil in your transfer case cool in harsh conditions. This Series model is supplied with a new gasket and replacement fastening bolt to replace the brittle standard studs. Being solid aluminium, the cover completely eliminates leaks caused by differential expansion. If your vehicle is pre 1980 you can use your existing drain plug and washer. Owners of Later Series Vehicles with Metric fasteners should purchase a plug (Land Rover part 235592) to fit the threads in this casting. As the cover expands at the same rate as the aluminium transfer case the stubborn oil leaks associated with the original steel cover are completely eliminated.




SIMILAR PRODUCTS TO THIS

ROAMERDRIVE OVERDRIVE UNIT

DA9015

  • Series 1, 2, 2A and 3 models

The distinctive extra lever on the right hand side of the transmission tunnel on a Series 1, 2 or 3...