50A Traction Control Battery Support Unit

Diagnostics, Reprogramming, ABS Brake Bleeding

BSU2-50 provides a stable voltage and up to 50 amps of fully regulated power to prevent loss of charge and damage to the battery. BSU2-50 can be used with any 12V automotive battery including AGM and GEL. When the battery is charged the BSU is a regulated power supply to sustain accessory loads and offset parasitic drain. Designed for use in the workshop and compatible with most diagnostic trolleys. Reverse polarity protection. Output current display. Supplied with 5M IEC power lead and 5M output leads.

> This low profile (90mm) BSU2-50 battery support unit provides a constant voltage to prevent loss of data and possible damage to control units during software updates, and module reprogramming as well as diagnostic processes when in a Key On, Engine Off state.
> During diagnostic or programming operations, the vehicle’s systems are operating solely from the battery. Maintaining battery charge during this process is critical.
> Designed to be wall, ramp or trolley mounted the BSU2-50 has been designed to meet the needs of the high power consuming vehicle.
> Supplied with 5M output leads as standard.

Input - 100 - 240VAC / 50/60Hz
Output - 13.4V up to 50A continuous
Size - 280 x 190 x 90mm
Weight - 6kg