Britpart
The Quality Parts for Land Rovers
Latest Products
Home > Latest Products
Here are Britpart's latest accessories. Click on the product code for more information.
Latest Products
Performance Equipment > Brake anti-squeal pads
Universal self adhesive noise dampening shims
Set of 4
Interior Protection > Loadspace nets & retention kits
Loadspace nets
Can be used in two positions within the loadspace
Content - 1 x net
Exterior Protection > Wheel arch kit - standard
Replace any faded or damaged wheel arches with this OEM replacement wheel arch kit
Front & rear
RHS & LHS
Vehicle Enhancements > Vehicle enhancements
Front grill kit screw kit
8 x 6.3 x 19mm self tap pozi screws
Vehicle Enhancements > Vehicle enhancements
Light lens kit - sidelights, indicators and rear lights screw kit
16 x 3.5 x 25mm self tap pozi screws
Vehicle Enhancements > Vehicle enhancements
Rear cross member to body kit bolt kit
10 x M8 x 25mm socket cap bolts
10 x M8 nyloc nuts
10 x M8 flat washers
Vehicle Enhancements > Vehicle enhancements
Bumper kit bolt kit
4 x M10 x 120mm bolts
4 x 3mm x 30mm flat washers
4 x plastic head caps
Vehicle Enhancements > Vehicle enhancements
Bonnet hinge kit bolt kit
6 x bolts
6 x nyloc nuts
6 x washers
Vehicle Enhancements > Vehicle enhancements
Door kit - rear Safari bolt kit
6 x M8 x 55mm allen head bolts
6 x M8 x 30mm allen head bolts
12 x M8 nyloc nuts
12 x M8 flat washers
Vehicle Enhancements > Vehicle enhancements
Door kit - front - 2-door bolt kit
The J-clips are carbon and phosphor coated to give 450 salt hour life
8 x nyloc Nuts
8 x M8 x 35mm countersunk allen head bolts
8 x M8 x 55mm countersunk allen head bolts
8 x M8 J-clips
Vehicle Enhancements > Vehicle enhancements
Door kit - front & rear - 4-door - bolt kit
The J-clips are carbon and phosphor coated to give 450 salt hour life
4 x M8 x 100mm & 80mm countersunk allen head bolts
8 x M8 x 35mm countersunk allen head bolts
16 x M8 x 55mm countersunk allen head bolts
8 x M8 J-clips
16 x nyloc nuts & M8 flat washers
Winching Equipment > Winch bumpers
Suitable for DB12000i, DB9500i, DB9000C & DB8000 winches
One piece bumper manufactured from 5mm steel with wrap around sides to protect the wings
Fixed to standard mounting points with provisions for 2 swivel recovery points and 2 Hi-Lift jacking points
Exterior Protection > Bumper
Rear heavy-duty bumper
Note - will also fit 200Tdi see note below
Manufactured from 5mm steel, finished in black
Incorporated steel end caps
Provision for nato/recovery point in centre of bumper
Exterior Protection > Bumper
Rear heavy-duty bumper
Manufactured from 4mm steel, finished in black
Incorporated steel end caps
2 Recovery points and 2 Hi-Lift jacking points included
Engines & Transmission > Cylinder heads
Complete cylinder head
Supplied with valves and springs assembled, pressure tested and with heat tell tale stickers on
Note - This head has additional waterways for improved cooling. Use multi-leaf metal head gasket (LVB500220 - 3 hole) with this head
Engines & Transmission > Cylinder heads
Complete cylinder head
Supplied with valves and springs assembled, pressure tested and with heat tell tale stickers on
Suspension Equipment > Air spring conversion kits
2" Lift ride height
Heavy-duty
Front & rear kit
Ideal if winch is fitted
Suspension Equipment > Wide angle propshafts
Replacement heavy-duty universal joint for wide angle propshafts -
DA6350; DA6351; DA6352; DA6353; DA6354
Repair & Service Parts > Door hinge kits
Replacement aluminium door hinges with stainless steel hinge pins
4 hinges per set
Natural finish
Complete with fixings
Suspension Equipment > Panhard rod
Adjustable panhard rod
If your Defender has raised suspension it is wise to use an adjustable panhard rod to correct the axle position which will in turn maintain and restore the steering geometry.
Suspension Equipment > Suspension kits - Britpart Cellular Dynamic
Full Suspension Kit
Medium-duty
Kit includes Plus 5" shock absorbers - please see text for further details
Suspension Equipment > Suspension kits - Britpart Cellular Dynamic
Shock Absorber & Spring Suspension Kit
Light-duty
Kit includes Plus 5" shock absorbers - please see text for further details
Suspension Equipment > Shock absorbers - Britpart Cellular Dymanic
Rear
Lift - 125mm/5" (**see text)
Open/Closed Dimensions - 750/440mm*
Suspension Equipment > Shock absorbers - Britpart Cellular Dymanic
Front
Lift - 125mm/5" (**see text)
Open/Closed Dimensions - 765/455mm*
Suspension Equipment > Shock absorbers - Britpart Super Gaz
Rear
Lift - 50mm/2"
Open/Closed Dimensions - 635/390mm*
Suspension Equipment > Shock absorbers - Britpart Super Gaz
Front
Lift -50mm/2"
Open/Closed Dimensions - 640/400mm*